Rosemount 8800D Series User Manual

Reference Manual
00809-0100-4004, Rev BA
August 2010
Rosemount 8800D
4-6
Flange Type
Flange Type enables you to specify the type of flange on the flowmeter for
later reference. This variable is preset at the factory but can be changed if
necessary.
• Wafer
•ANSI 150
• ANSI 150 Reducer
•ANSI 300
• ANSI 300 Reducer
•ANSI 600
• ANSI 600 Reducer
•ANSI 900
• ANSI 900 Reducer
• ANSI 1500
• ANSI 1500 Reducer
•PN10
• PN10 Reducer
•PN16
• PN16 Reducer
•PN25
• PN25 Reducer
•PN40
• PN40 Reducer
•PN64
• PN64 Reducer
• PN100
• PN100 Reducer
• PN160
• PN160 Reducer
• PN250
• PN250 Reducer
•JIS 10K
• JIS 10K Reducer
•JIS 16K/20K
• JIS 16K/20K Reducer
•JIS 40K
• JIS 40K Reducer
•Spcl
Field Comm. 1, 4, 1, 3

Rosemount 8800D Series Specifications

General

Type	Vortex Flow Meter
Measurement Principle	Vortex Shedding
Operating Temperature	-40 to 185°F (-40 to 85°C)
Storage Temperature	-40 to 185°F (-40 to 85°C)
Communication Protocols	FOUNDATION Fieldbus
Material	316 stainless steel
Fluid Type	Liquid, Gas, Steam
Line Size	1/2 to 8 inches (15 to 200 mm)
Approvals	ATEX, IECEx, CSA, FM
Output Signal	4-20 mA
Process Connection	Flanged, Wafer, Threaded
Electrical Connection	M20
Protection Rating	IP66
Mounting Style	Wafer, Flanged