Reference Manual
00809-0100-4004, Rev BA
August 2010
Rosemount 8800D
www.emersonprocess.com/rosemount
Section 1 Introduction
How to Use this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
HOW TO USE
THIS MANUAL
This manual provides installation, configuration, troubleshooting, and other
procedures for the use of the Rosemount 8800D Vortex Flowmeter.
Specifications and other important information are also included.
Section 2: Installation
Contains mechanical and electrical installation instructions.
Section 3: Configuration
Contains information on entering and verifying basic configuration
parameters.
Section 4: Operation
Contains information on advanced configuration parameters and functions
that can aid in maintaining the 8800D.
Section 5: Troubleshooting
Provides troubleshooting techniques, diagnostic information, and transmitter
verification procedures.
Appendix A: Reference Data
Provides reference and specification data.
Appendix B: Approval Information
Provides specific information for approval codes.
Appendix C: Electronics Verification
Provides a short procedure for verification of electronic output to assist in
meeting the quality standards for ISO 9000 certified manufacturing
processes.
Figure 1-1: Rosemount 8800D HART™ Menu Tree
Provides command tree, and Fast Key Sequence tables for the Field
Communicator when used in conjunction with the Rosemount 8800D.
To Next Page
Loading...
Need help?
General
