Wireless Router RNX-N150RT User Manual
Figure 4-31 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
ress that you want to filter.
iption of the wireless station.
button. The "Add or Modify
entry" page will appear, shown in Figure 4-32:
MAC Address - The wireless station's MAC add
Status - The status of this entry, either Enabled or Disabled.
Description - A simple descr
To Add a Wireless MAC Address filtering entry, click the Add New…
Wireless MAC Address Filtering
Figure 4-32 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
00-0A-EB-B0-00-0B.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
- 65 -
To Next Page
Loading...
