Wireless Router RNX-N150RT User Manual
ring the PC
CP/IP correctly in Windows XP.
First make sure your Ethernet da ter is working, refer to the adapter’s manual if necessary.
1. Configure TCP/IP component
skbar, click the Start button, and then click Control Panel.
2) Click the Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt page.
Appendix B: Configu
In this section, we’ll introduce how to install and configure the T
A p
1) On the Windows ta
Figure B-1
4) In the prompt page that showed below, double click on the Internet Protocol (TCP/IP).
Figure B-2
- 118 -
To Next Page
Loading...
