Rosewill RNX-N150RT - Host

Wireless Router RNX-N150RT User Manual
For example: If you desire to allow the host with MAC address00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in
the LAN to access the Internet, you should follow the settings below:
1. Click “Access Control→Host” in the left to enter the Host Settings page. Add a new
entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
2. Click “Access Control→Target” in the left to enter the Target Settings page. Add a new
entry with the Target Descr in Name is www.google.com.
art Time is
4. Click “Access Control → Rule” in the left to return to the Access Control Rule
Access Control” and choose "Deny the
ny access control policy to pass through the router".
s:
e that this name should be
iption is Target_1 and Doma
3. Click “Access Control→Schedule” in the left to enter the Schedule Settings page. Add a
new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, St
1800 and Stop Time is 2000.
Management page. Select “Enable Internet
packets not specified by a
5. Click Add New... button to add a new rule as follow
 In Rule Name field, create a name for the rule. Not
unique, for example Rule_1.
 In Host field, select Host_1.
 In Target field, select Target_1.
 In Schedule field, select Schedule_1.
 In Action field, select Allow.
 In Status field, select Enable.
 Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.13.2 Host
Choose menu “Access Control→Host”, you can view and set a Host list in the screen as shown
in Figure 4-59.The host list is necessary for the
Access Control Rule.
- 87 -