Wireless Router RNX-N150RT User Manual
address you will use when accessing
your router from the Internet. This function is disabled when the IP address is set to the
nge 0.0.0.0 to a valid IP address. If set to
(in Navigator) box, followed by a colon and the custom port
ter http://202.96.12.8:8080
in the box provided. Choose a number between
1 and 65534 but do not use the number of
any common service port.
Remote Management IP Address- This is the current
default value of 0.0.0.0. To enable this function cha
255.255.255.255, then all the hosts can access the router from internet.
Note:
1. To access the router, you should type your router's WAN IP address into your browser's
address (in IE) or Location
number. For example, if your router's WAN address is 202.96.12.8, and the port number used
is 8080, please en
in your browser. Later, you may be asked for the
s the router's web-based utility.
4.12 Parental Control
ntrol”, you can configure the parental control in the screen as shown
control the internet activities of
the
child, limit the child to access certain websites and restrict the time of surfing.
router's password. After successfully entering the username and password, you will be abl
e to
acces
2. Be sure to change the router's default password to a very secure password.
Choose menu “Parent
al Co
in Figure 4-53. The Parental Control function can be used to
Figure 4-53 Parental Control Settings
Parental Control - Check Enable if you want this function to take effect, otherwise check
Disable.
MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or
you can make use of the Copy To Above button below.
MAC Address of Your PC - This field displays the MAC address of the PC that is managing
this router. If the MAC Address of your adapter is registered, you can click the Copy To Above
button to fill this address to the MAC Address of Parental PC field above.
Website Description - Description of the allowed website for the PC controlled.
- 82 -
To Next Page
Loading...
