ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
12. Finishing work
To warrant engine operation within temperature limits of the coolant a thermo-sensor for
observation of the coolant temperature is required.
Note: Refer to Operator’s Manual (section 3.1) for limits of operation regarding coolant
temperature.
12.1. Venting of the gear compartment
Remove cap from the venting screw.
With an appropriate length of the supplied fuel hose establish connection between
venting screw and a collecting reservoir.
Note: The venting hose must not reach all the way to the bottom of the collecting
reservoir.
Warning: Before engine operation, read the Operator’s Manual.
Seite/page 69/98
Ausgabe/Edition 11/2014
To Next Page
Loading...
