Section 4 Control Denitions H85A Manual
www.rottlermfg.com
4-3
Hand Controls
E-STOP Switch
This switch is used in an emergency situation. Pushing the button in will disconnect the power to all the
motors that run the machine except the coolant pump motor. The machine will stop dead in place when
activated. To restore power to the machine turn the button clockwise until it pops out.
Handwheel
The handwheel is used to manually move the machine in different directions according to which axis is
activated. The handwheel is also used to manually feed the stones in or out.
To Next Page
Loading...
