Section 3 Safety H85A Manual
www.rottlermfg.com
3-3
Electrical Power
All electrical power should be removed from the machine before opening the rear electrical
enclosure.
In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least
resistance to disperse electric current.
Electrocution or a re can result if the machine is not grounded correctly.
Make sure the ground is connected in accordance with this manual. DO NOT
operate the machine if it is not grounded.
No single list of electrical guidelines can be comprehensive for all
shop environments. Operating this machinery may require additional
electrical upgrades specic to your shop environment. It is your responsibility to make sure your
electrical system comply with all local codes and ordinances.
To Next Page
Loading...
