Rottler H85A - Machine Description

Section 1 Introduction H85A Manual
www.rottlermfg.com
1-2
Description
The model H85A Honing Machine is a wet, complete cylinder block and general purpose-honing machine
A Windows based touch screen panel provides easy and convenient control of the H85A. Block programs
can be created and stored to memory for later recall, providing a quick set up for honing common blocks.
All preferences such as dwell setting, cross hatch angle, and honing loads are automatically set up when
a block program is selected at time of machine set-up.
The support carriage is mounted on linear rails to provide simple and easy hole-to-hole setup.
Convenient devices are provided to properly control honing operations and provide easy handling.
Fixtures are available for doing a large variety of engine types. Special xtures and tooling for doing large
industrial engine sleeves is also available.
A coolant tank is located under the main splash tank and a coolant pump is located behind the machine.
A button is provided on the control panel to operate the coolant system.
Disclaimer
The H85A Manual (henceforth to be referred to as the “Manual”) is proprietary to Rottler Manufacturing
LLC. (“Rottler Manufacturing”) and no ownership rights are hereby transferred. No part of the Manual
shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or
transmitted by any means, for any commercial purpose, including without limitation, sale, resale, license,
rental or lease, without the prior express written consent of Rottler Manufacturing.
Rottler Manufacturing does not make any representations, warranties or guarantees, express or implied,
as to the accuracy or completeness of the Manual. Users must be aware that updates and amendments
will be made from time to time to the Manual. It is the user’s responsibility to determine whether there
have been any such updates or amendments. Neither Rottler Manufacturing nor any of its directors,
ofcers, employees or agents shall not be liable in any manner whatsoever to any person for any loss,
damage, injury, liability, cost or expense of any nature, including without limitation incidental, special,
direct or consequential damages arising out of or in connection with the use of the Manual.
Rottler Manufacturing and its employees or representatives are not responsible for any information
regarding nal specications of any workpiece that is created as a nal product when using Rottler
equipment. It is the responsibility of the end user of Rottler equipment to determine the nal dimensions
and nishes of the workpiece that they are working on. Any information regarding nal dimensions and
nishes that appears in any Rottler literature or that is expressed by anyone representing Rottler is to
be regarded as general information to help with the demonstration of or for operator training of Rottler
equipment.