Configuring Wireless Settings
Configuring Wireless # (WLAN Number) Settings
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 96
When you configure the WLAN with WPA-PSK, wireless users are not able to
connect to your WLAN unless their devices support WPA-PSK and are configured
with the same passphrase.
1 Go to Configuration > Wireless/Radio 2.4/Radio 5G. The Configuration >
Wireless > Common page appears.
2 Click the Wireless # (WLAN number) tab that you want to configure. The selected
Configuration > Wireless > Wireless # (WLAN number) page appears.
Figure 37. WPA settings
3 Click the Encryption Method menu, and select WPA. An additional set of WPA-
specific options appear.
4 Review the encryption settings listed in Table 2 8 , and then make changes as
required.
To Next Page
Loading...
