MCA-C3 Test Procedure
Page 22 of 77
7. Click “File” then “Open Workspace”.
Select and Open the “MCA-C3 Boot Loader”.
Select and Open the “MCA-C3 Boot Loader.AWS” file.
Note: If the MCA-C3 Boot Loader is in the left hand window
(Projects pane) you can continue to the next step.
8. Click “File” then “Open Data File” and navigate to the current version of the
MCA-C3 Boot Loader file named “RNetBoot_MCA_C3_(version#).bin”.
Note: You can store the RNetBoot_MCA_C3_(version#).bin file in the
“Load a Data File” folder for ease of use.
The FDT 4.01 dialog will display the following:
To Next Page
Loading...
