RYTEC System 4 User Manual

INSTALLATION—SYSTEM INPUTS
16
Timers
The control system includes three programmable auto-
close delay timers. Each timer is assigned to a specific
input on the control panel and is set to delay closing the
door when opened by its associated activator.
Two timers (ACL1 and ACL2) can be programmed to
automatically close the door from the open position. The
third timer (ACL3) can be programmed to close the door
from the optional passage position. (The optional pas-
sage position is reserved for setting the open position of
the door to a height other than the open position.)
See “” on page 28 for additional information on setting
the auto-close delay timers and the optional passage
option.

RYTEC System 4 Specifications

General

Brand	RYTEC
Model	System 4
Category	Controller
Language	English