SCHEMATICS—GENERAL - RADIO CONTROL AND E-STOP
61
GENERAL - RADIO CONTROL AND E-STOP
Figure 49
EMERGENCY
STOP
REMOTE EMERGENCY STOP
PUSH BUTTON, BY RYTEC,
FIELD MOUNTED. SCHEMATIC
REFERENCE SHOWN AT LEFT.
REMOVE JUMPER WHEN
O,C,S STATION IS UTILIZED.
OPEN INPUT, W/ CLOSING
VIA CLOSE INPUT ONLY
CLOSE INPUT
STOP INPUT, JUMPER
MUST BE REMOVED
A5400027
NOTE: This schematic is provided for
general information purposes
only. Due to varying require-
ments for individual installations,
another schematic is shipped
with each door and that sche-
matic must be used for that spe-
cific installation.
Remote Emergency Stop Connections (Optional)
Open, Close, Stop Station Connection (Optional)
Radio Control Connections
Loop Detector Connections
NOTE: Dashed lines indicate
additional feild wiring
may be required.
To Next Page
Loading...