Sam4s ER-230EJ - Page 117

SAM4S ER-230EJ Manual Program Mode • 117
#/NS
#/NS Function Options
Option
Entry
Description
DESC1
Alpha
numeric
24 character
You can program a unique descriptor for the no sale
function. The default descriptor is NOSALE.
DESC2
Alpha
numeric
24 character
You can program a unique descriptor for the non add #
function. The default descriptor is NON ADD #.
NO SALE KEY
DISABLE
Y or N
Select Y to disable the no sale function (non-add entries
are allowed).
UNDER
MANAGER
CONTROL
Y or N
Select Y to allow operation only in manager operation
mode.
INHIBIT NO
SALE AFTER
NON-ADD #
Y or N
Select Y if you want disable the NO SALE function after a
non-add number is entered.
COMP. # AT
START OF SALE
Y or N
Select Y if you wish to enforce the entry of a non-add
number at the beginning of each transaction. (For example,
to track the number of customers in each sale or to identify
a customer number with each sale.)
PRINT ON N/S
Y or N
Select N to stop printing when a NO SALE is performed.
NON-ADD #
PROHIBIT
Y or N
Select Y to disable the non-add # function.
COMP NON-ADD
# MUST MATCH
MAX DIGIT
Y or N
Select Y if you wish all non-add number entries to have the
exact number of digits selected in the MAX DIGIT flag
below.
MAX DIGIT (0-8)
0-8
Enter the maximum number of digits for non-add number
entry. Zero (0) means no limit.