Sam4s ER-230EJ - Page 118

118 • Program Mode SAM4S ER-230EJ Manual
%1 -%5
%1 -%5 Function Options
Option
Entry
Description
DESC
Alpha
numeric
24
character
You can program a unique descriptor. The default
descriptors are % 1-4.
AMOUNT:Y %:N
Y or N
Select Y if you wish for this key to apply an amount (as
in a coupon). Select N if you wish for this key to apply
the percentage (as in a discount or surcharge).
AMOUNT/RATE
5 digit
If the function is an amount, enter the amount from 0 to
999.99. If not zero, the amount will be the preset coupon
amount. If the function is a percentage, enter a percentage
from 0 to 99.999%. If not zero, the percentage will be the
preset percentage
KEY DISABLE
Y or N
Select Y to disable this function.
UNDER MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this
function in REGISTER mode. When selected, the
function is allowed only in the MANAGER MODE.
OPEN:Y PRESET:N
Y or N
Select Y if you wish the amount or percentage to be
entered by the operator; select N if you wish the amount
or percentage to be preset.
SALE:Y ITEM:N
Y or N
Select Y if you wish the amount or percentage to apply to
the sale total. Select N if you wish the amount or
percentage to apply to an item.
OVERRIDEABLE
Y or N
Select Y if you wish to enter a percentage or amount to
override the preset percentage or amount set in the RATE
field.
POS.:Y NEG.:N
Y or N
Select Y if you wish for the amount or percentage to add
to the sale total. Select N if you wish for the amount or
percentage to subtract from the sale.
TAXable BY TAX1
TAXable BY TAX2
TAXable BY TAX3
TAXable BY TAX4
Y or N
Select N to tax any taxable items before the discount or
surcharge is applied (tax the gross amount). Select Y to
tax any taxable items after the discount or surcharge is
applied (tax the net amount).
ALLOW ONLY ONE
TIME SUBTOTAL
ENTRY
Y or N
If Y, you can enter only a single coupon and you must
press the SUBTOTAL key before the coupon entry.