Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 155
Delete PLU
Note: To delete a PLU, all totals for the PLU must be cleared from Z1, Z2, Stock, PLU and
Not Found PLU reports.
From the PLU PROGRAMMING screen, press 1 to display the DELETE PLU
screen:
DELETE PLU
0.DELETE ONE PLU
1.DELETE PLU RANGE
Press 0 to delete an individual PLU. The PLU NUMBER screen displays:
PLU NUMBER
* ENTER PLU NUMBER
AND PUSH PLU, OR
* PRESS A PLU KEY ON
THE KEYBOARD
0
Enter the number of the PLU you wish to delete, or press a PLU key on the keyboard,
or press modifier key followed by the PLU key on the keyboard. The CONFIRM
DELETE screen displays:
CONFIRM DELETE
ARE YOU SURE YOU
WISH TO DELETE PLU#
CASH=DELETE
CLEAR=ABORT
Press CASH to delete the PLU; press CLEAR to return to the PLU DELETE screen
without deleting the PLU.
To Next Page
Loading...
