Sam4s SPS-300 Series - Tare

212 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
F/S TEND
1. Press the F/S TEND key to view the food stamp tender function key options:
FOOD STAMP PROGRAMMING 
DESC : F/S TEND 
HALO 0.00
EXEMPT TAX 1 N
EXEMPT TAX 2 N
EXEMPT TAX 3 N
EXEMPT TAX 4 N
ALLOW DECIMAL N
2. Press CASH from the last field or press PAGE DOWN to view the second page of
food stamp tender function key options:
FOOD STAMP PROGRAMMING 
CHANGE IS ISSUED IN CASH N
DOES DRAWER OPEN Y
COMPULSORY VALID N
ALLOW OVER TEND. N
SEND TO EFT N
3. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY PROGRAM
screen without saving changes.
F/S TEND Key Program Notes
Option Entry Description
DESC
Alpha numeric
12 character
You can program a unique descriptor. The default descriptor is
F/S TEND.
HALO 7-digit amount
You can limit errors by setting the maximum amount that can be
used with this function. "0" means that there is no entry limit.
EXEMPT TAX 1-4 Y or N
If taxes are exempted automatically on food stamp sales (as is
most often the case) select Y for each tax that is actively used
and needs to be exempted.
ALLOW DECIMAL Y or N
If N, food stamp tender must be in whole dollar amounts, i.e. $1,
$5, or $10. If Y, the tender is allowed in any amount.
CHANGE IS ISSUED
IN CASH
Y or N If Y, food stamp change less than $1 will be issued in cash.
DOES DRAWER
OPEN
Y or N Select N if you do not want the drawer to opened with this key.
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
ALLOW OVER TEND Y or N Choose Y to allow tendering over the food stamp subtotal.
SEND TO EFT Y or N
Option added at version 1.034.
Select Y if you want this key to
send to total to the connected DataTran device.