Sam4s SPS-300 Series - System Option Programming

156 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Delete PLU Range
Note: To delete PLU’s, all totals for the PLU’s must be cleared from Z reports (including
Stock and PLU reports.)
From the PLU PROGRAMMING screen, press 1 for to display the DELETE PLU
screen:
DELETE PLU
0.DELETE ONE PLU
1.DELETE PLU RANGE
Press 1 to delete a range of PLU’s. The PLU NUMBER screen displays:
PLU NUMBER
* ENTER NUMBER OF
THE FIRST PLU IN THE RANGE
AND PUSH PLU
0
Enter the number of the first PLU in the range you wish to delete and press PLU.
The screen prompts for the last PLU in the range:
PLU NUMBER
* ENTER NUMBER OF
THE LAST PLU IN THE RANGE
AND PUSH PLU
0