190 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
#/NO SALE Function Options
Option Entry Description
DESC1 Alpha
numeric
12 character
You can program a unique descriptor for the no sale
function. The default descriptor is NOSALE.
DESC2 Alpha
numeric
12 character
You can program a unique descriptor for the non add #
function. The default descriptor is NON ADD #.
NO SALE KEY
DISABLE
Y or N Select Y to disable the no sale function (non-add entries are
allowed).
UNDER MGR
CONTROL
Y or N Select Y to allow operation only in manager operation mode.
INHIBIT NO SALE
AFTER NON-ADD #
Y or N Select Y if you want to disable the NO SALE function after
a non-add number is entered.
ENFORCE # ENTRY
AT START OF SALE
Y or N Select Y if you wish to enforce the entry of a non-add
number at the beginning of each transaction. (For example,
to track the number of customers in each sale, or to identify a
customer number with each sale.)
PRINT ON N/S Y or N Select N to stop printing when a NO SALE is performed.
NON-ADD #
PROHIBIT
Y or N Select Y to disable the non-add # function.
COMP NON-ADD #
MUST MATCH
MAX DIGIT
Y or N Select Y if you wish all non-add number entries to have the
exact number of digits selected in the MAX DIGIT flag
below.
MAX DIGIT (0-8) 0-8 Enter the maximum number of digits for non-add number
entry. Zero (0) means no limit.
To Next Page
Loading...
