Sam4s SPS-300 Series - Print Option Programming

166 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Programming a VAT (Value Added Tax)
When a tax is included in the cost of the item, you can use the value added tax (VAT) program to
calculate the tax share of each sale.
Turn the control lock to the PGM position.
From the PROGRAM MODE menu, press 2 to view the TAX PROGRAMMING
screen:
TAX PROGRAMMING
TAX NUMBER (1-4) 1
DESC : TAX1
TAX TYPE (0-2) 0
0 : ADD-ON
1 : TAX TABLE
2 : VAT
When the arrow is pointed at the TAX NUMBER field, enter the number of the tax
you wish to program. (There are four taxes available, enter 1, 2, 3, or 4.)
The arrow will move to the DESC. field. Enter a descriptor for the tax rate if desired;
Press CASH.
The arrow will move to the TAX TYPE field. Enter 2 for VAT . The appropriate
TAX # PROGRAMMING screen displays:
TAX #1 PROGRAMMING
TAX RATE 0.000
When the arrow is pointed at the TAX RATE field, enter the VAT rate. For example,
if the tax is 6 percent, enter 6.000 or 6.0. If the tax is 7.5 percent, enter 7.500 or 7.5
using the decimal key. If the tax is 10 percent, enter 10.000 or 10. Press CASH to
set the rate.
The TAX PROGRAMMING screen will return, prompting you to enter the next tax,
if necessary. Continue to program additional taxes or press CLEAR to return to the
PROGRAM MODE screen.