226 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
RECD ON ACCT 1-3
Press one of the RECD ON ACCT keys to view the received on account function
key options:
RA #1 KEY PROGRAMMING
DESC : RA1
KEY HALO 0.00
(0 : NO LIMIT)
KEY DISABLE N
UNDER MGR CONTROL N
COMPULSORY VALID N
Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY PROGRAM
screen without saving changes.
RECD ON ACCT 1-3 Key Program Notes
Option Entry Description
DESC Alphanumeric
12 character
You can program a unique descriptor. The default
descriptors are RA 1-3.
HALO 7-digit
amount
You can limit errors by setting the maximum amount that
can be used with this function. "0" means that there is no
entry limit.
KEY DISABLE Y or N Select Y to disable this function.
UNDER MGR
CONTROL
Y or N Select Y if you do not want the operator to use this function
in REGISTER mode. When selected, the function is
allowed only in the X control lock position.
COMPULSORY
VALIDATION
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
To Next Page
Loading...
