Sam4s SPS-300 Series - Training Mode

Sam4s SPS-300 OP Manual v1.35 Operations • 95
Quick Price Change
Beginning at version 1.081, the PRICE CHANGE Function key was added. This version or
later is required to use the quick price change function.
See “PRICE CHANGE” on page 223 to set the options for this function key:
• You may need to place the key lock in the X position to complete this function (under
manager control).
• The new price you enter may permanently change the price, it may never change the pre-
programmed price, or it may prompt you to decide whether the new price is permanent.
1. Press the PRICE CHANGE key.
PRICE
CHANG
E
2. Press a preset PLU key, or enter a PLU
number and press the PLU key:
1 PLU001
3. Enter the new price.
3 0 0
4. Press the PRICE CHANGE key again.
PRICE
CHANG
E