246 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Mix & Match Name
Each Mix & Match discount function can be programmed with a unique 12-character descriptor.
The number of Mix & Match discounts is set in memory allocation. See “Mix & Match
Program” on page 112 for more information.
From the LOGO DESC. PROGRAM screen, press 5 to display the MIX &
MATCH DESC. Screen:
MIX & MATCH DESC. ↓
M & M 1 :
M & M 1
M & M 2 :
M & M 2
M & M 3 :
M & M 3
Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the descriptor.
For the SPS-345 use the descriptor code method (see page 147.) Each descriptor can
be up to 12 characters. If you make a mistake, press the BACKSPACE key (on the
alpha overlay or enter the backspace code 97 if you are using the descriptor code
method) to erase the previous character. After you have completed typing the first
descriptor, press CASH to accept the new message and advance to the next descriptor
or press CLEAR to return to the LOGO DESC. PROGRAM screen without making
any changes.
Press CASH repeatedly, or press PAGE UP and/or PAGE DOWN to locate the next
mix & match descriptor you wish to program. After the last item on each screen, the
screen shifts to display the next 3 mix & match descriptors. Using the same
procedure, continue programming each line as necessary. Press CLEAR at any time
to exit and return to the LOGO DESC. PROGRAM screen.
To Next Page
Loading...
