SECTION III USE
Raising and lowering the implement
To raise the implement, pull the yellow lever backwards (in the yellow
sector), until the desired height is achieved.
To lower the implement push the yellow lever forwards close to the limit of
the yellow sector.
The green lever should be positioned on No. 12 of its own sector.
Transporting with raised implement
The yellow lever must be pulled backwards all the way.
The green lever must be placed on No. 12 of its own sector.
Working with position control
(rotary harrows, cultivators, manure spreaders, etc.)
Place the green lever on No. 12 of its own sector.
Move the yellow lever along the yellow sector until the desired working
position is reached, setting its travel with the adjustable stop screw to
return on the next run to the same working position.
Lift control levers
1 - Maximum draft control 2 - Draft control - green sector
3 - Minimum draft control 4 - Down
5 - FLOAT - blue sector 6 - Mixed control
7 - Depth control - yellow sector 8 - Up
47
WARNING: NEVER TOW IMPLEMENTS USING LOWER LINK ARMS.
PULL ONLY FROM THE APPROVED DRAWBAR OR TOW HITCH.
TOWING OR ATTACHING TO OTHER LOCATIONS MAY CAUSE THE
TRACTOR TO OVERTURN.
12 11 10 9 8 7 6 5 4
3
210
1
2
4 5 6 7 8
3
To Next Page
Loading...
Need help?
General
