140
Member of Exel group
DRT582165110
A - 2023/03
• Step 6:
When there are several cards of the same type, it
can be difficult to differentiate between them.
To overcome this difficulty, it is possible to
«identify» the cards.
To do this, the user selects the line of the card he
wants to locate: a LED will flash for 20 seconds on
the selected card.
• Step 7:
If all the cards are detected, the user can press the
Download button (a confirmation message will
appear). Result: example of screen displayed
(below.).
• Step 8:
At the end of the download, the button will be
grayed out
The user can start his bus by pressing the Start
button.
To Next Page
Loading...