DEC EU 578161130
Siège Social / Headquarter: 13, chemin de Malacher - CS70086 - 38243 Meylan Cedex - France - Tél / Phone: +33 (0)4 76 41 60 60
SAS au capital de 12.720.000 euros | RCS Grenoble: 572 051 688 | Code APE: 2829B | TVA intracom: FR36 572051688
DECLARATION OF INCORPORATION
OF PARTLY COMPLETED MACHINERY
EU DECLARATION OF CONFORMITY
(1)
The manufacturer declares herewith declares that the equipment is in conformity with the relevant Union harmonization legislation.
(2) Equipment type
Electronic Dosing System Cyclomix® Evo
(3)
Applicable
Directives
2006/42/CE
(4)
The relevant technical documentation was compiled
as specified in annex VII, part B
.
The essential health and safety requirements mentioned in the Directive 2006/42/CE on
Machinery have been applied.
Articles: 1.1.5 ,1.1.6, 1.3.1, 1.3.2, 1.3.4, 1.5.1, 1.5.2
(5)
That
partly
completed
machinery
is
also
in
conformity
with
the
provisions
of
2014/30/UE
Electromagnetic Compatibility Directive
2014/35/UE
2012/19/UE
Waste Electrical and Electronic Equipment (WEEE)
(6) Notified body
INERIS 0080 – 60550 Verneuil-en-Halatte – France – INERIS-EQEN
(7)
This partly completed machinery must not be put into service until the final machinery in which it is to be
incorporated has been declared in conformity with Directive 2006/42/CE on Machinery.
Sames is allowed to compil the technical documentation.
Sames undertakes to transmit, in response to a reasoned request by the national authorities, relevant
information
on the partly completed machinery in the most appropriate form. This declaration of incorporation
of
partly
completed
machinery
and
this
declaration
of
conformity
are
issued
under
the
sole
responsibility
of
the
manufacturer.
Director of the STAINS site - Executive Management (EM)
Hervé WALTER
Established in Stains, on
DocuSign Envelope ID: 16440D20-99A5-4EF7-83D5-9F3A222A4046
25-nov.-22 | 08:21 CET
To Next Page
Loading...