36
Member of Exel group
DRT582165110
A - 2023/03
4 LED COM 0 (green/red)
This LED indicates the status of the EtherCAT network.
Extract from the documentation ETG.1300 S (R) V1.1.1
When it is green (see below)
When red: it is that a critical communication or application error has occurred.
# LED status Description
Indicator states Slave state Description
Off Initialization The device is in the INIT state.
Blinking Pre-operational
The device is in
pre-operational state
Single flash
Safe
operational
The device is in state SAFE-
OPERATIONAL.
ON Opérational
The device is in state
OPERATIONAL.
Flikering
Initialization or
bootstrap.
The device is booting and has
not yet entered the entered
the INIT state.
To Next Page
Loading...