55
Member of Exel group
DRT582165110
A - 2023/03
Information
provided
Explanations Example(s) of screen(s)
Type of machine
• Allows you to define if the Cyclomix® Evo
will prepare mono and bi-component products
(choice = 2K) or mono, two or three component
products (choice = 3K).
• Si If 2K, then a certain number of
parameters present in the configuration or confi-
guration or recipe screens will be grayed out or
absent.
• The user declares by checking the boxes
located on the right of the screens if the ele-
ments mentioned are included in his configura-
tion.
• Depending on the configuration, some
screens will not be displayed and some
functions will be available or not in some menus.
Number of guns
• This field takes the value 1 or 2 depending
on the depending on the number of guns
configured.
• The fields on the other pages concerning
the second gun will be grayed out or absent as
the case may be.
Airless
• By checking this box, the user specifies
that the box cannot receive information about
an open gun, either because of the presence of
debistats or because of a signal from an external
controller (robot, machine, PLC).
• If this box is checked, it is then necessary
to specify a time of ''non production'''.
• This time corresponds to the maximum
time allowed for the Cyclomix
®
Evo not to
receive information from the flowmeters while it
is in production.
Example: The value is set to 30 seconds.
If the Cyclomix
®
Evo is in production and does not
receive any information from the flowmeters,
then after 30 seconds the Cyclomix
®
Evo will
trigger an alarm.
To Next Page
Loading...