Revised A 6 6301
WARNING :
• Always follow the procedures described below:
• Always wear safety glasses.
• No fire, smoking or sparks near equipment.
• Comply with all local, state and national safety regulations in regards to this type of
applicator and equipment.
SAFETY :
• Do not stop rotary bellcup by hand or with any object.
• Protect yourself by following the proper “SHUT OFF” procedures in force in your
facility. Refer to your supervisor for detailed instructions.
• Ensure high voltage is “shut off” when servicing in the spray booth.
• Prior to working on the PPH 607 make sure that the turbine has come to a complete
stop. Make sure that no one can start the turbine while it is being worked on.
• Disassemble the atomizer only after all fluid and pneumatic tubes are depressurized
and isolated from compressed air during repair.
To Next Page
Loading...