Samson TROVIS 5500 - Selecting Operating Modes

EB 5573-1 EN 11
Operation
Zooming in/out
q Select 'Zoom'.
¼ Open zoom function.
q Zoom in or out.
¼ Conrm display.
Closing the Trend-Viewer
q Select 'Back'.
¼ Close the Trend-Viewer
2.3 Selecting operating modes
Day mode (rated operation): regardless of the programmed times-of-use and summer mode,
the set points relevant for rated operation are used by the controller. Icon:
Night mode (reduced operation): regardless of the programmed times-of-use, the set points
relevant for reduced operation are used by the controller. Icon:
Control operation deactivated: regardless of the programmed times-of-use, control opera-
tion of the heating circuits and DHW heating remains deactivated. The frost protection is ac-
tivated, if need be. Icon:
Icons when the frost protection is activated: HC
, DHW
Automatic mode: during the programmed times-of-use, the controller works in day mode.
Outside these times-of-use, the controller is in night mode, unless control operation is deacti-
vated depending on the outdoor temperature. The controller switches automatically between
both operating modes. Icon within the times-of-use:
, icon outside the times-of-use:
Manual mode: valves and pumps can be controlled manually. For further details, refer to
section4.