Chapter 3. Installing the Product 3 - 25
① BodyMarker list: The list varies depending on the group selected from Group. ‘Current
page/Total pages’ is displayed below the list. If there are two or more pages, change
pages by using ⇨ or ⇦.
② BodyMarker list for the probe or preset currently being used. ‘Current page/Total pages’
is displayed below the list. If there are two or more pages, change pages by using ⇨ or
⇦.
NOTE
You can add or save between 1 and 100 BodyMarkers in each list.
- Adding a BodyMarker
Select a BodyMarker from the left list (①) and double-click it. The selected BodyMarker
is added to the list on the right (②). The right list cannot have duplicated BodyMarkers. If
this occurs, a warning message will pop-up.
- Removing a BodyMarker
Select and double-click a BodyMarker in the list (②) on the right.
- Saving and Canceling the BodyMarker list
Press Save to save the list. Press Close to cancel.
- Resetting the BodyMarker list
Click Reset. This restores the system’s default settings.
▐ Text
Set to use Delete all Text with Un-freeze, Delete all Annotation with Mode Change, Autotext,
Caps Lock On, and Quick Text.
Delete all Text with Un-freeze
If this checkbox is checked, all of the text that has been entered is deleted at once when
you return to scan mode by pressing the Freeze button.
Delete all Annotation with Mode Change
Check this checkbox to clear the entered annotation when you change the mode.
Autotext
If an abbreviation is entered, the system retrieves and enters a full word automatically.
When this option is selected, you can enter text more easily and quickly. For example, if
To Next Page
Loading...