8 - 2 HS70A Service Manual
Caution
This chapter describes the procedure for disassembling and assembling HS70A. Refer to this
chapter when you are upgrading or servicing the system’s hardware.
WARNING
■ Samsung Medison customer service department or its authorized
engineers are allowed to repair or replace the parts of the products.
■ Hazardously high voltage flows through the product. Do not
disassemble the product. There is a risk of electrocution.
■ Do not wear an antistatic wrist strap while you are working with the
product powered on. You may sustain an electrical injury.
Preparation
You will need the following items: A Phillips (+) screwdriver, antistatic gloves, and an antistatic
wrist strap.
Turn off the power of the product and detach the battery.
NOTE
Wear antistatic gloves and wrist strap when you are disassembling or
reassembling the product. They help to prevent accidents to the engineer
and product failure caused by static electricity.
[Figure 8.1] Antistatic Gloves and Wrist Strap
To Next Page
Loading...