Chapter 3. Installing the Product 3 - 35
Network
Select the Network tab in the Setup screen. Or tap Network on the touch screen. You can set
E-mail, Network Status, etc.
[Figure 3.17 Setup - Network]
▐ LAN
Network Configuration
The System Network window will open to allow you to configure the IP.
▐ Wireless
WLAN
Use a USB adapter to connect the system to a wireless network.
- SSID: Displays the name of the connected wireless network. SSID stands for Service
Set IDentifier.
-
Authentication: Displays the authentication method for the wireless network.
- Encryption: Displays the data encryption method for communicating with the wireless
network.
- Password: Enter the password for the network.
NOTE
The Wireless Network Settings window is enabled only when the system is
connected to a wireless USB adapter.
To Next Page
Loading...