3 - 36 HS70A Service Manual
Connecting to a wireless network
1. Use the trackball and the Set button to press the Scan button.
2. Select a wireless network to connect to.
3. Tap the Connect button to connect the system to the wireless network.
4. Tap the Disconnect
button to disconnect the system from the wireless
network.
5. Press the Close button to complete the setup.
▐ E-mail
Enter the details of the server that this product should use to send/receive e-mails.
Mail(SMTP) Server
Configure the e-mail server.
Port No.
Enter the port number.
ID
Enter the log-on ID for the e-mail server to use.
Password
Enter the log-on password for the e-mail server to use.
To Next Page
Loading...