Chapter 3. Installing the Product 3 - 33
User Defined Keys
Select the User defined Key tab in the Setup screen. Or tap User Defined Key on the touch
screen. You can set the functions of the keys and buttons on the product.
[Figure 3.16 Setup – User Defined key]
▐ User Key Setup
Assign functions to the U1, U2, U3, U4, and U5 buttons on the control panel. The
functions that can be set are shown below.
Key List
– Current key : Displays the current settings of the User Key button.
Mode None, M Line, Annotation, BodyMarker
Features Biopsy, Printer2
Measure EFW Measure, EFW Result, BPD, HC, AC, FL, APTD, TTD, FTA, GS,
CRL
Control Single, Dual, Quad, Dual Live, Change Window, Probe Change,
Application Change, Simultaneous, Send to DICOM, Exit (only U1 can
be set)
Print Store Clip, Save, Record, Volume Save, Stressecho, TDI Mode, TDW
Mode
To Next Page