Chapter 5. Probes 5 - 13
Ultrasound Transmission Gel
For successful acoustic signal transmission, please only use the ultrasound gels approved by
Samsung Medison.
WARNING
■ The use of inappropriate ultrasound gels could result in damages in the
probe. Using damaged probe could cause injuries such as electric shock in
users or patients.
■ Do not use ultrasound gels or contact media that contain the following
contents.
– Oils such as mineral oil, cooking oil, gasoline, solvents, rust inhibitors,
lanolin, paraffin-based grease, ester and excessive silicon-
agent.
– Alcohols such as acetone, methanol, plasticizer (dioctylphtalate) or
denatured alcohols.
– Glacial acetic acid and iodine.
– All types of lotions or gels that contain aromatic substances.
▌ Gel Warmer (Optional)
The Gel Warmer keeps the ultrasound gel warm. Warming up ultrasound gel takes
approximately 5 minutes.
■ Always turn the Gel Warmer off when it is not in use.
■ Do not put your hands inside the Gel Warmer, as it may burn your skin.
CAUTION
■ Do not use the Gel Warmer for purposes other than to control the
temperature of ultrasound gel.
■ Do not place the probe or any other equipment inside the Gel Warmer.
■ Do not touch the power terminal of the Gel Warmer while you are examining
a patient. There is a risk of electric shock from leakage current.
■ Do not apply excessive force to the Gel Warmer, or you may damage its
support parts.
To Next Page