Chapter 4. Inspecting the Product 4-7
Check the probe for noise, and check whether the probe’s motor works normally.
④ Check for errors in ROI 3D, ABC 3D, and Full images.
⑤ Check whether the 3D image changes to the selected angle.
⑥ Check whether the 3D image’s contrast changes to the selected value.
⑦ Check for errors in the image when you change the size of the image.
⑧ Check the Display Format Image (ACB, Volume CT Image).
⑨ Step Angle , Rotation Angle, Rot. Axis and then proceed with Cine; check whether Cine
Loading works in accordance with the Setting items, and check for breaks and errors in the
image.
To Next Page