3 - 8 HS70A Service Manual
▐External Peripheral Devices
These are peripheral devices that can be connected for use when needed and are connected
via the USB port located at the rear panel.
NOTE
When removing the removable disk, use Utility > Storage manager.
The system cannot recognize USB 1.1 flash memory. Remove the flash
memory from the console and equip again with an appropriate device.
USB Video Printer
USB Line Printer
USB to RS-232C Serial Cable
Foot Switch
Other Flash Memory Media
CAUTION
When using a peripheral device via a USB port, always turn the power
off before connecting/disconnecting the device.
Connection/disconnection of USB devices during power-on may lead to
malfunction of the system and the USB devices.
Do not connect additional external peripheral devices to the auxiliary
socket outlet. Doing so may decrease safety level.
To Next Page
Loading...