Santerno Sinus M - 10.25 Parameters Restore default; Lock

10-47
 See the table below to unlock the user-set parameter via password.
Step Note Keypad display
1 Move to H95 code. H95
2 Press Enter () key. L
3
Parameter value cannot be changed in L(Lock)
status.
L
4 Press Enter () key. 0
5 Enter the password created in H94 (e.g.: 123). 123
6 Press Enter () key. UL
7
Parameter value can be changed in UL (Unlock)
status. While seeing this message…
UL
8 Press Enter () key. H95