To Next Page
A
adam32Sep 8, 2025
Why is the image reversed left to right on my Sanyo PLC-XU301A?
- AAshley RodriguezSep 8, 2025
If the image from your Sanyo Projector is reversed left to right, check the Ceiling/Rear function settings.
Why is the image reversed left to right on my Sanyo PLC-XU301A?
If the image from your Sanyo Projector is reversed left to right, check the Ceiling/Rear function settings.
Why does the input signal switch automatically on my Sanyo PLC-XU301A Projector?
If your Sanyo Projector's input signal switches automatically, ensure the Input search function is properly adjusted.
What to do if my Sanyo Projector has no image?
If your Sanyo Projector displays no image, verify the connection to your computer or video equipment. Ensure your computer's input signal is correctly output, adjusting monitor settings if necessary, as detailed in your computer's manual. Allow approximately 30 seconds for the image to appear after powering on the projector. Also, check the Input signal, color system, video system, or computer system mode. Confirm that the projector's operating temperature is within the specified range of 41°F–95°F [5°C–35°C]. If 'No Show' is active, press the NO SHOW button or any other button on the remote control to restore the image.
Why is the image distorted on my Sanyo PLC-XU301A?
If the image on your Sanyo Projector is distorted or runs off the screen, check the PC adjust menu or Screen menu and make the necessary adjustments.
What to do if the initial display is not shown on Sanyo PLC-XU301A?
If the initial display is not shown on your Sanyo Projector, make sure 'Off' or 'Countdown off' are not selected in the display settings.
What to do if PIN code dialog box appears on Sanyo Projector?
If your Sanyo Projector displays a PIN code dialog box, it means the PIN code lock is enabled. Enter the correct PIN code, which is either “1234” or the numbers you set.
Why doesn't auto keystone work on my Sanyo Projector?
If the auto keystone function doesn't work on your Sanyo Projector even when tipped, ensure that the Auto keystone function is not set to Manual. Press the AUTO SETUP button on the top control.
Why does the Sanyo Projector display strange colors?
If the color on your Sanyo Projector appears strange, check the Input signal, color system, video system, or computer system mode. Also, ensure that the Blackboard setting is not selected in the Image select menu.
How to fix an out of focus image on a Sanyo PLC-XU301A?
If the image from your Sanyo Projector is out of focus, adjust the focus. Ensure the projector is placed at the proper distance from the projection surface. Inspect the projection lens and clean it if necessary. If the projector has been moved from a cool to a warm environment, condensation may have formed on the lens; allow it to evaporate before use.
Why is there no sound on my Sanyo Projector?
If there is no sound from your Sanyo Projector, check the audio cable connection from the audio input source. Adjust the audio source volume. Note that the projector's built-in speaker is disabled when the AUDIO OUT is plugged in. Sound is only available when an image is projected.
General| Brightness | 3000 lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 500:1 |
| Weight | 3.4 kg |
| Display Technology | 3LCD |
| Aspect Ratio | 4:3 |
| Lamp Life | 2000 hours (Normal mode), 3000 hours (Eco mode) |
| Projection Size | 40" - 300" |
| Lamp Type | UHP lamp |
| Input Ports | VGA, Composite, S-Video, Audio |
| Output Ports | VGA, Audio |
| Operating Temperature | 5°C to 35°C |
Important safety warnings including earthing, exposure to moisture, and lens stare.
Covers operation, cleaning, power source, and avoiding hazards.
Instructions for servicing, replacement parts, and when to contact qualified personnel.
Guidance on setting up the projector for optimal projection distance and size.
Details on cables and connections for computer input.
Instructions for connecting the projector to the AC power outlet.
Step-by-step guide to turning the projector on.
Procedure for entering the PIN code when the projector is locked.
Step-by-step guide to safely turning the projector off.
Explanation of the hierarchical menu bar and its sections.
Automated adjustment for input, PC, and keystone correction.
Selecting RGB input sources for Computer 1 and Computer 2.
Automatic and manual selection of computer signal formats.
Automatic adjustment of PC signal parameters.
Manual fine-tuning of PC signal parameters like sync, dots, and position.
Selecting predefined image modes for different viewing conditions.
Adjusting contrast, brightness, color, white balance, sharpness, and gamma.
Automatic or manual selection of video system formats (PAL, NTSC, etc.).
Adjusting video image parameters like color, tint, sharpness, and noise reduction.
Configuring input search, auto PC adjustment, and auto keystone.
Key lock and PIN code lock functions to prevent unauthorized operation.
Interpreting warning and power indicators for projector status.
Instructions for cleaning projector filters and resetting the filter counter.
Step-by-step guide for replacing the projector lamp.
Important safety instructions for handling and replacing the projector lamp.
Detailed technical data including dimensions, weight, power, and interfaces.
