Why does the remote control not work on my Sanyo PLC-XU301A?
If your Sanyo Projector's remote control isn't working, start by checking the batteries. Ensure there are no obstructions between the remote and the projector. Make sure you're within the maximum operating range of 16.4 feet (5 meters). Verify that the remote control code matches the projector's. Lastly, confirm that the Key lock function for the remote control is unlocked.
How to troubleshoot no power on a Sanyo Projector?
If your Sanyo Projector has no power, ensure the power cord is securely plugged into the AC outlet. Check if the POWER indicator lights up red. If it's blinking, wait for it to stop before attempting to turn the projector on again. Also, check the WARNING indicator; if it lights up red, it indicates a potential issue.
Why is my Sanyo PLC-XU301A picture not bright enough?
If the picture on your Sanyo Projector isn't bright enough, first check whether the Contrast or Brightness settings are properly adjusted. Next, verify that the correct Image mode is selected. Then, inspect the lamp control function. Finally, check the LAMP REPLACE indicator; if it's lit, the lamp is nearing the end of its life and should be replaced promptly.
General| Brightness | 3000 lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 500:1 |
| Weight | 3.4 kg |
| Display Technology | 3LCD |
| Aspect Ratio | 4:3 |
| Lamp Life | 2000 hours (Normal mode), 3000 hours (Eco mode) |
| Projection Size | 40" - 300" |
| Lamp Type | UHP lamp |
| Input Ports | VGA, Composite, S-Video, Audio |
| Output Ports | VGA, Audio |
| Operating Temperature | 5°C to 35°C |
Important safety warnings including earthing, exposure to moisture, and lens stare.
Covers operation, cleaning, power source, and avoiding hazards.
Instructions for servicing, replacement parts, and when to contact qualified personnel.
Guidance on setting up the projector for optimal projection distance and size.
Details on cables and connections for computer input.
Instructions for connecting the projector to the AC power outlet.
Step-by-step guide to turning the projector on.
Procedure for entering the PIN code when the projector is locked.
Step-by-step guide to safely turning the projector off.
Explanation of the hierarchical menu bar and its sections.
Automated adjustment for input, PC, and keystone correction.
Selecting RGB input sources for Computer 1 and Computer 2.
Automatic and manual selection of computer signal formats.
Automatic adjustment of PC signal parameters.
Manual fine-tuning of PC signal parameters like sync, dots, and position.
Selecting predefined image modes for different viewing conditions.
Adjusting contrast, brightness, color, white balance, sharpness, and gamma.
Automatic or manual selection of video system formats (PAL, NTSC, etc.).
Adjusting video image parameters like color, tint, sharpness, and noise reduction.
Configuring input search, auto PC adjustment, and auto keystone.
Key lock and PIN code lock functions to prevent unauthorized operation.
Interpreting warning and power indicators for projector status.
Instructions for cleaning projector filters and resetting the filter counter.
Step-by-step guide for replacing the projector lamp.
Important safety instructions for handling and replacing the projector lamp.
Detailed technical data including dimensions, weight, power, and interfaces.
To Next Page
