Operating Concept
Operating Instructions Arium
®
Comfort I, Comfort II 15
Pos. Description Function
1 “Eco/Home”
Key
The Eco/Home key is used to activate the “Eco
mode”. In the Eco mode, the ultrapure water in your
Arium
®
Comfort system is recirculated every hour
for 15 minutes. The purpose of this is to guarantee
high water quality even during longer periods
of operation.
To access the Eco mode, press and hold the Eco/
Home key for 3 seconds. To exit an active Eco mode,
press the Eco key once more. The following picture
shows the active Eco mode.
Your Arium
®
Comfort system also features an automatic ECO mode. This
automatic ECO mode is activated by default and returns the system to the
Eco mode after the Eco time has elapsed. The Eco time starts after the last
entry into the system. It can be configured in the System menu (see Chapter
“8.3.4 ECO-Mode”, page 46).
Key Locking Function
The Arium
®
Comfort system has a key locking function. When the key
locking function is active, it is not possible to dispense water, not even with a
foot switch. All other functions (measurement, expiry of ECO time, print
interval, memory interval, and error and warning messages) continue to run
in the background. When the automatic ECO time has elapsed, the device
enters ECO mode and automatically removes the key lock so that the
device is once again ready for operation upon leaving ECO mode. If a
warning or an error appears while the key lock is activated, the device will
likewise automatically cancel the key lock and display the corresponding
message.
To activate the key lock, simultaneously press the Eco/Home key and the
“Dispense” Key (R). Use the same key combination to deactivate the key
locking function.
1
To Next Page
Loading...
