Care and Maintenance
54 Operating Instructions Arium
®
Comfort I, Comfort II
9 Care and Maintenance
The main menu Care contains the maintenance section for your system.
You have access to the following options:
Start system cleaning
Start bag replacement
Replace prefilter
Replace RO module(s)
Replace softener (on Comfort II version)
Tank rinsing
Backflushing
UV lamp timer (for system with UV lamp)
Changing cartridge
Final filter timer
TOC rinse (for system with UV lamp & TOC)
Depressurization
When PIN protection is active, the Care menu can only be accessed after
the user enters the right PIN.
The Care function is primarily designed to help you keep your Arium
®
Comfort system free of contamination and guarantee consistent water
quality. For example, bacterial growth and the biofilm that can build up
within the modules and lines are prevented.
The frequency of care procedures necessary for the system depends on:
The quality of the feed water (tap water)
Pure water quality requirements (tank)
Ultrapure water consumption
The Arium
®
Comfort system issues a warning when the care interval of a
component has expired. The color of the display then turns yellow (active
warning). Once the appropriate care has been performed, the interval is
reset and the warning deactivated.
Care
Start system cleaning
Start bag replacement
Replace prefilter
Replace RO module(s)
To Next Page
Loading...
