Unpacking and Installation
Operating Instructions Arium
®
Comfort I, Comfort II 19
Pre-treatment cartridge, softeners (on Comfort II version), ultrapure water
cartridge, bags and Bagtank are not part of the equipment supplied with the
Arium
®
Comfort system and must be purchased separately.
5.2 Installation
WARNING
Danger of electric shock!
Do not place your Arium
®
Comfort system on top of electrical equipment.
Water may spill when using the system.
WARNING
Danger of fire or explosion!
Do not use your Arium
®
Comfort system in the vicinity of highly flammable
or combustible materials as it contains components that may ignite such
materials.
Place the Arium
®
Comfort system on a flat surface.
When selecting a place of installation for your Arium
®
Comfort system,
you must ensure that a feed water supply, a 100–240 V electric socket
and an atmospherically vented drain are available. Use only a cable with
a protective grounding conductor.
Connecting your Class I rated Arium
®
pro system to AC power (mains
supply): The device comes with a power supply that has a built-in grounding
conductor. The Arium
®
pro system must be plugged into a properly installed
wall outlet which has a protective grounding conductor (PE). The only way
to switch the device off completely is to unplug the power cord. Install the
device in such a way that it is easy to unplug the power cord.
To Next Page
Loading...
