Sartorius Arium Comfort I H2O-I Series - Single-Item Save; Save Interval; Save When Dispensing; Settings

System Menu
42 Operating Instructions Arium
®
Comfort I, Comfort II
8.2.2 Single-item Save
To start a Single printout and | or Save once procedure, select under Menu
 Save data the item Single printout and | or Save once. The selected
parameters are output. Afterwards, the system switches to the operating
mode.
8.2.3 Save Interval
To access the Print interval and | or Save interval functions, highlight the
appropriate checkbox under Menu  Save data. In the Menu  Save data
 Settings, the interval can be adjusted within a range of 1 to 60 minutes.
This applies to data printing and to digital storage on the SD card.
8.2.4 Save when Dispensing
To access the Print when dispensing and | or Save when dispensing
functions, highlight the appropriate checkbox under Menu  Save data. As
soon as the Arium
®
Comfort system dispenses ultrapure water, the data are
saved on the selected medium.
8.3 Settings
In the Settings menu, you can configure your Arium
®
Comfort system.
Access is available under Menu  Settings. All configuration options are
described in the following.
When PIN protection is active, the Settings menu can only be accessed
after the user enters the right PIN (see Chapter "8.3.15 Pin", page 51).
Menu r Settings
Displayed values
Limit values
iJust
ECO mode

