Initial Startup
30 Operating Instructions Arium
®
Comfort I, Comfort II
6.8 System Rinsing
t Connecting Feed Water Tubing (Inlet) and Rinse Water Tubing (Drain) to
the Arium
®
Comfort System. Use the pre-assembled tubing from the
Arium
®
Comfort accessories. Guide the tubing to the drain. Next, open
the feed water inlet.
NOTICE
The rinsing tubing should be firmly secured in the outlet! During operation
of your Arium
®
Comfort systems, small amounts of water can escape here.
Observe the information in Chapter "12 Technical Specifications"!
t Connect the tubing for ultrapure water (Tank Outlet) of the Arium
®
Comfort system and direct toward drain.
t Start the rinsing process.
Startup
Connect the feed water tubing
and rinsing tubing to the
device and open the feed
water inlet
OK
Startup
Connect tubing to
“Tank Outlet” and
direct toward drain
OK
Startup
Press Start to rinse
the system
Start
To Next Page
Loading...
