Unpacking and Installation
20 Operating Instructions Arium
®
Comfort I, Comfort II
5.3 Wall Mounting
If you order a wall-mounted system, your Arium
®
Comfort is supplied with a
wall bracket to enable you to attach the system securely to the wall so that it
occupies a minimum amount of space. A clear wall area of 63 × 63 cm is
required.
The wall bracket and the required screws for wall installation are not part of
the regular equipment supplied.
CAUTION
The wall rail included for wall installation is suitable for a weight of up to
®
Comfort (including water).
Do not put any additional load on the Arium
®
Comfort. When mounting the
unit on a wall, make sure that the mounting surface and fasteners selected
are capable of supporting a minimum of 100 kg (220 lbs). Inadequate
support and | or fasteners may result in injury to the operator and damage to
the equipment.
Use the pre-drilled slotted holes in the wall rail to mount it onto the wall.
t Fasten the wall rail to the wall using suitable screws and dowels (ensure
that it is horizontally aligned).
t Mount the Arium
®
Comfort by hooking it into the wall mounting bracket.
Arium
®
Comfort as a wall-mounted system
Back panel of the Arium
®
Comfort with unit’s
screw holes and wall rail on models used as wall-
mounted systems
To Next Page
Loading...
