System Menu
52 Operating Instructions Arium
®
Comfort I, Comfort II
8.4.2 Measured Values
Under Menu System status Measured values, you can display the
following information:
LFP – conductivity in the ultrapure water (compensated only)
Temperature in ultrapure water
TOC in ultrapure water (with built-in TOC monitor only)
Volume of dispensed ultrapure water
Current tank contents
LFA – conductivity of the pure water (Comfort II version only)
LFR – conductivity of the pure water (Comfort I version)
LFF – conductivity of the feed water (compensated only)
Temperature in feed water
With connected Arium
®
Smart Station: The water removed from the water
purification device and the system as a whole is displayed.
The measured values LFA, LFR, LFF and the temperature of the feed water
are only displayed when the tank is not completely filled.
8.4.3 Timer
Under Menu System status Timer, you can display the remaining
service life for the following components:
System cleaning
Bag replacement
Prefilter
RO modules
Softener (on Comfort II version)
UV lamp
Cartridge
Final filter
The Arium
®
Comfort system issues a warning when the replacement interval
of a component has expired. The corresponding component must then be
replaced (Care menu).
8.4.4 Service
Under Menu System status Service, you can display the following
information:
Service telephone number (can be entered by a local service techni-
shipped for delivery)
Next maintenance (only if a service | maintenance contract exists)
r r Measured values
LFP: 18.2 µS/cm c
Temp.: 28.0 °C
TOC: 1.0 ppb
Volume of dispensed
Back
r r Timer
System cleaning: 92 days
Bag replacement: 184 days
Prefilter: 92 days
RO Modules: 730 days
Back
r r Service
Service telephone number:
www.sartorius.com
Next maintenance due in 32
weeks
Back
To Next Page
Loading...
