Initial Startup
26 Operating Instructions Arium
®
Comfort I, Comfort II
t Connect the sensor cable of the Arium
®
Bagtank to port 6 (see
Chapter "3.3 Arium
®
Comfort Electrical Connections", page 11) of
your Arium
®
Comfort system.
If the sensor cable has already been connected, this prompt does not appear.
6.7 Purification Component Installation
t Install the purification component as described in the following.
Tank Volume
Make the electrical
connection between the
Bagtank and the device
OK
Startup
Install the prefilter and
cartridge according to the
operating instructions
OK
Comfort I version
Startup
Install the prefilter, softener
and cartridge according to the
operating instructions
OK
Comfort II version
To Next Page
Loading...
